Rabbits are known for their timidity, so owners of furry animals often face the problem of their escape. Catching an eared animal is not an easy task, but there are several ways that make this process easier. Fishing in the forest and in the garden has its own characteristics. Below are several methods on how to catch a runaway rabbit on your own.
How to catch a runaway rabbit
The stressed state of an animal can be easily determined by external signs: the rabbit begins to stand on its hind legs, stretching out its ears, and looks around warily.Or the long-eared animal presses itself to the ground, knocking with its hind legs. This behavior signals that the timid creature is frightened and is ready to run away at any second.
To prevent your pet from attempting to escape, you should pay attention to its behavior. In case of fright, eliminate the factors that provoke the animal’s stress. They can scare him:
- the appearance of a new animal in the house;
- loud sounds;
- sudden movements.
If your pet gets scared and runs away, you don’t need to run after it. This can scare him even more. It is enough to lure the rodent to the cage by putting its favorite treat there.
If an animal takes flight in the absence of its owners, it is advisable to think through the trajectory of its movement before searching for the pet. Perhaps the animal is hiding somewhere in a secluded place. Usually he tries to find familiar places when trying to escape. If detected, you need to slowly approach the furry pet, bend over and try to calm it down by talking and stroking it. You should never make sudden movements or grab the animal by the scruff of the neck when it does not see it.
Catching a rabbit in the garden or garden
Catching a furry animal in the garden becomes somewhat more complicated, since the area of the area for the animal to maneuver increases significantly. Once in the garden, the rodent becomes the main pest: it eats the leaves of trees, shrubs, and crops. It is useless to run after a rabbit around a personal plot, this will only make the animal more frightened, and the owner will needlessly lose strength.
In order not to harm the rabbit, it is enough to follow a few rules:
- They preliminarily assess the situation and study the tracks left by the animal on the site. Usually, out of habit, a pet chooses a place to hide in the area of bushes.
- Having calculated the location of the pet, they set up a cage with a feeder, and put the rabbit’s favorite treat in it.
- The animal is lured with food by laying out a path of pieces of treats leading to the house.
- Food is added several times a day so that the pet gets comfortable and feels confident around the cage.
- If attempts to catch the animal are unsuccessful within a week, the house with food is moved to another place.
How to catch a wild specimen with your own hands
It is extremely difficult to catch a wild animal in its natural habitat. An animal that has evolved throughout its development has learned to adapt in the wild and hide from danger.
Racing after an eared animal will only lead to a loss of energy and time. To catch him, you will need to make a trap. To do this, use one of four options for making a trap.
Silky
To make a standard trap you will need 1-1.5 meters of brass wire. A loop with a diameter of 5-7 centimeters is twisted from it. To do this, bend it closer to the edge and make 5-6 turns around the long part. The long end of the wire is threaded into a loop and twisted in a similar way. A strong rope is passed through the ring and fixed to the tree.
The prepared snare is installed in natural arches in places where furry animals most often live. To do this, find a rabbit trail - the area where the animal most often runs. If there is no natural arch, it is made independently by trimming branches. The loop is placed 10-15 centimeters from the ground. The sides of the trap are slightly covered with branches so that the rabbit does not sense danger.
Wolf pits
The easiest way to catch a wild animal is to dig a hole. The trap is prepared at the site of the rabbit trail.Dig a hole 0.7 meters wide and at least one meter deep. Thin branches are laid crosswise on top of the trap, hiding them under a layer of leaves and earth. Camouflage should be done as close as possible to the natural habitat. Bait is placed in the center of the trap: vegetables, corn.
When installing a trap, you do not need to check or trim it too often, otherwise the human smell will remain on the parts. It may scare away rabbits.
Long-eared rodents are not particularly smart, so catching them is not difficult. It is enough to be patient and wait for the animal to fall for the trick.
Cells
It is considered the most humane method when catching a wild animal, since the risk of injury to the animal is minimized. To catch a rabbit in this way, purchase a ready-made cage or make it yourself.
The principle of the trap is as follows: when the victim gets inside the cage to feast on it, the cage slams shut under the weight of the animal, and the animal remains locked inside. The food is placed on the trap mechanism, otherwise the rabbit will have lunch and calmly leave the cage. The mechanism is activated by lifting the door up. Check the operation of the product using a long stick. If everything works properly, set the trap at the chosen location.
Using a box
Using a cardboard box is considered the most affordable, but less reliable option when hunting for a furry animal. The process consists of several stages. First, prepare a box at least one meter wide. The bottom is cut out in it. Then prepare a thin branch 1.2 meters long, tie it to the stump with one end and the other to the ledge.
Two holes are cut in the box through which the string is passed. Its ends are tied together.A regular thread 4 centimeters long is tied to the center of the branch and connected to twine. The box is suspended at a height of 1 meter. Two additional holes are made in its upper part. A piece of string is passed through them. One end of it is tied to the center of the previous rope, the second is left hanging.
A rabbit treat is tied to the free end of the string. Having jumped up to the food, the long-eared animal pulls the rope, which breaks and the box falls. Thus the animal finds itself in a trap.
Useful tips
To easily catch a pet or wild animal, just follow these simple recommendations:
- Long-eared rodents have an excellent sense of smell, so they smell human smells from afar. When catching an animal, you need to approach it carefully, without sudden movements or displays of aggression.
- Rabbits are very fast animals that can develop good speed. To make your task easier when fishing, the free space is reduced. To do this, obstacles are installed so that the rabbit cannot move further. It is much easier to catch a pet in a small area.
- If attempts to catch a rodent are unsuccessful, a specialized service will help.
In catching a furry animal, it is not strength that is important, but intelligence and ingenuity. Only by cunning can you catch an active animal in the garden or in the wild. The main thing in the hunting process is not to harm the rabbit.
