20 drawings with the dimensions of cages for rabbits with your own hands and an assembly video

You can make cages for domestic rabbits yourself. True, to build a home for animals you will need wooden boards and a metal mesh with a fine mesh. The construction of the structure begins with a frame, which is sheathed with wood or woven wire. If you plan to keep animals outside all year round, make the most enclosed wooden cages possible.

Choosing a cell location

Pets must be kept in a special non-residential premises, in which the temperature is maintained all year round from 10 to 20 degrees Celsius, there is light, windows, doors, and ventilation. Rabbits are usually kept in cages. It is not advisable to place animals outdoors, in the wind or draft.

Cages can be portable or stationary. They can stand along the wall, in the middle of the room, in one, two, three tiers. The main thing is to provide free access to them. The cages are installed on wooden, metal risers or shelves, racks at a height of 50-80 cm from the floor in one, two or three tiers. The structures themselves must be free-standing, durable, easy to maintain, and not retain urine and feces. The optimal value is 0.5 square meters. meters of area per adult animal.

What tools and materials will you need?

Housing for domestic rabbits can be made from wooden boards, plywood, chipboard, plastic, metal mesh with a small mesh, and drywall. During the work process, you may need thin sheet metal for sheathing, a metal profile, a profile pipe or strong wooden slats to construct the frame. In order to make a structure, you need some tools: a grinder, a drill, a hammer, nails, rivets, self-tapping screws, screws, a tape measure or a ruler.

Dimensions and drawing

One cage can contain one or more rabbits. The size of the structure depends on the number of animals, their breed and age of the animals.

For adults

When building a home for large rabbits, first draw a model or draw a diagram, according to which there is at least 0.5 square meters per animal. meters of area.A single cage should have the following dimensions: length - 0.7-1.4 m, width - 0.5-0.7 m, height - 0.5-0.6 m. A homemade structure for males or females is placed at a height of 50 -80 centimeters from the floor on special risers or shelves.

To save space in the room, you can make two-tier and even three-tier cages.

To build a structure in 2 tiers, draw a drawing corresponding to two cells located one above the other. Between adjacent tiers a gap of 15-30 cm is left for the pallet. The total height of this structure is 1.5-2 meters. Dimensions of one cage: length - 0.8-1.4 m, width - 0.7 m, height - 0.6 meters. Distance to the floor - 50-70 cm.

For young animals

Rabbits up to 1 month old are kept in the same cage with their mother. Then they are transferred to independent feeding and transplanted into a more spacious box. For one small rabbit you need 0.12-0.17 square meters. meters of area. Rabbits are usually kept in multi-place, that is, group cages. The most convenient for breeding animals on a farm are those designed for 7-10 young animals. Such cells can have the following (optimal) dimensions: length - 1.7 m, width - 0.7 m, height - 0.6 meters.

For giant rabbits

Adult large breed animals are kept in single crates. Homemade structures usually have at least 0.7 square meters. meters of area. The optimal dimensions of a rabbit cage are: length - 1.5 m, width - 0.8 m, height - 0.8 meters.

For a female with cubs

For a female rabbit with her babies, it is recommended to build a spacious housing of the following dimensions: length - 1.2 m, width - 0.6 m, height - 0.6 meters.There are designs with nesting and feeding compartments, separated from each other by a partition with a round hole. The dimensions of such a structure are: length - 1.7 m, width - 0.6 m, height - 0.6 meters.

How to make a rabbit cage with your own hands

On large farms, rabbits are usually kept in metal mesh cages without bedding, inside which there is a feeder and drinking bowl. Ready-made designs are sold in stores. They are designed for 1-2 rabbits. These cages have a metal mesh top and a plastic or tin tray. They cost about 50-100 dollars. You can make your own housing for your animals from scrap materials.

Dimensions for video:

Wooden

The cheapest construction is made from wooden planks. Hardwood (oak, maple, beech) is suitable for its manufacture. The wooden box should have a screen door or a metal mesh front to provide fresh air to the animals. In such a cage the rabbits will be warm and comfortable even on the street, but they will have to build a roof on top. True, it is difficult to clean a wooden floor from fecal residues; it quickly begins to rot under the influence of urine.

Step-by-step instructions for making a cage:

• a frame is made from bars of a certain length;
• sheathe the base on three sides with boards;
• the floor can be made of slats and leave 1 cm gaps;
• It is advisable to make a hinged roof;
• a door is installed in the front wall;
• a mesh is nailed to the front wall or door.

You can build a structure where the entire front wall is a screen door. The metal mesh is nailed to the wooden frame. You can attach a feeder to the door. Such a device will help keep food clean and remove spoiled food residues in a timely manner.

From metal profile

In addition to wood, metal elements can be used to make housing for rabbits. True, such products have not only advantages (cheapness, ease of care), but also disadvantages. Mesh metal cages are not suitable for outdoor use. In the open air, such structures will quickly begin to rust. In addition, the mesh gets very hot in hot weather, and in severe frost it instantly cools down.

For a metal mesh cage, you first need to make a frame from slats, for example, from a metal profile, and then cover it with a mesh with the smallest mesh. You can build a combined structure of wood and metal. The walls and roof can be made of wood, the floor and doors are made of metal mesh.

Important! You can build a house for rabbits using drywall or plywood as partitions or walls. In any case, it is better to make the frame of the future structure from a metal profile. The metal profile bends easily, can be connected and installed at home.

From a profile pipe

Housing for pets can be assembled from various scrap materials that are available on the farm. First you need to build a frame. The strongest base is made from a metal profile. True, to connect the slats you will need a welding machine.

The frame is sheathed with wooden boards, metal mesh or plywood, and plasterboard. The durable wooden structure is suitable for keeping animals outdoors. If metal mesh was used for construction, then it is better to place such housing for rabbits indoors. In the tips for beginner rabbit breeders you can find recommendations that it is easier to make a cage for rabbits from wooden materials.

Arrangement of the cage inside

Housing for rabbits can have one spacious room or two sections: feeding and nesting. If the nesting compartment in the cage for females is not fenced off, then before breeding a queen cell is placed in it, that is, a closed plywood box with a hole 30 cm in diameter. A feeder, a hay barn and a drinking bowl are installed inside the structure. These items are made from plastic, wire, sheet metal or wood.

True, animals will quickly chew through thin plastic; it is better not to use it.

Feeders are installed near the door, front wall or suspended from the front partition. For hay, they buy or make their own wire feeders, which are taken outside the perimeter of the cage, that is, hung on the door or side, front wall. The drinking bowls are also attached to the front mesh partition. You can buy ready-made water supplies at a hardware store. For example, vacuum or nipple drinkers for rabbits.

The cage should also have enough space for the animal to be active. Some craftsmen make multi-tiered structures for their pets. At the top they set up a nest, at the bottom they make a feeding area with a spacious walking area. You can keep rabbits in wooden boxes in a warm room in winter, and in summer you can move them outside to a portable pen made of chain-link mesh, where they will eat pasture.

Interesting ideas for unusual cells

If you wish, you can build a real house for your animals with several rooms: a bedroom-nest, a kitchen-feeding area and a huge living room, that is, a place for walking. Some craftsmen make two-tier structures for rabbits. In the lower tier, instead of a floor, there is green grass, and the walls are made of a frame covered with mesh. At the top there is a wooden closed box for sleeping.The animals climb to the second floor along an inclined board-ladder.

You can make a cage for your animals in the form of a village house, where the balcony is a feeding trough for hay and grass, and the windows are openings with mesh in the side walls. On top of such a house there should be a roof covered with waterproofing roofing material. In winter and summer, such a structure can be placed outdoors.

A cage with an animal can be made from high-quality wooden materials and placed on a raised platform near the fence. It is better to make doors from mesh. On a flat roof you can place pots of flowers or a tray with fragrant plants (dill, parsley, celery) that rabbits love so much.