When choosing garden tools for removing weeds, you should focus on a number of criteria. Such tools can be manual or automatic. Such products also differ in their operating principle. To achieve good results in the fight against weeds, you should choose the most convenient device. It is also quite possible to make such a tool yourself.
Types of uprooters
Weeding is considered the most popular method of eliminating weeds. Therefore, it is recommended to choose the right tools for the procedure.
garden fork
This device is suitable for getting rid of weeds with strong and branched roots. If the teeth of this device are bent at an angle of more than 45 degrees, it can be used to loosen the soil. At the same time, you can remove grass that is poorly fixed in the ground.
It is worth considering that the handle of any device should be comfortable in your hand. This will prevent pain in the hand.
Root remover
The root remover allows you to get rid of deep-seated plants. There are several options for such cultivators. Some of them resemble a fork that has 2 flat prongs, others have a triangular blade and look like a corkscrew.
Crevice cleaner
This device is shaped like the letter “G”. It is used to get rid of grass between tiles. They are often used to design paths.
Hoes for efficient removal
Hoes have several varieties. They come in Dutch, hand or straight. The first category is characterized by a blade with a slight slope, which is fixed on a long handle. The device helps cut the roots of grass by processing the upper layers of soil.
For straight devices, the blade is fixed on a medium-length handle. This happens at a right angle, thanks to which it is possible to get rid of weeds by performing chopping movements. Hand choppers are small copies of straight ones. They help process young crops. You can collect the removed grass with a rake.
Electrical remover
In addition to mechanical devices, there are electric cultivators. They have a more radical effect on the soil, helping to completely remove weeds.
Requirements for a quality weeding tool
To combat grass, you need to choose the right equipment. It is permissible to use hoes or flat cutters for work. Special weeding pads are also often used. When choosing a tool, you should consider the length of the handle. It should be sufficient so that the gardener does not have to bend over.
The most convenient option would be devices that can be easily grasped by hand. It is worth considering the thickness of the wood from which the handle is made. It should be comfortable in your hand.
A wooden handle should be sanded so that there are no knots or burrs on the surface. Otherwise, there is a risk of injury and calluses. The wood for the handles should be soft and light weight. Tools made of beech or oak are considered very strong, but have an impressive mass.
It is important that the working surface of the device is located at an angle. This will help achieve maximum efficiency and require minimal effort.
The design of the device should imply a change in the angle of placement of the working part. When purchasing a tool, you should pick it up and evaluate the length of the handle. It should be comfortable. Equally important is the assessment of the angle of inclination of the working surface. It is desirable that the angle of the tool can be changed.
If you build the tool yourself, you can set the required angle right away. In this case, the device should be tried on for yourself.
How to make your own weed extractor
A hand-made tool will be as reliable as possible and will last a long time.It helps control the tops of the grass and its roots.
The product will require a tubular body with cutting fragments, which resembles a gutter with sharp edges. On the other hand, it is worth placing the cutting in the extractor. It is secured with a screw.
Materials and tools
The device can be made from a fragment of a pipe. Its diameter can be 25-42 millimeters. A handle will serve as a handle.
The tools you should prepare are a drill, a file, and a square for measuring. You will also need a grinder. It must be equipped with a cutting disc. In addition, you will need a screwdriver and a plane. It's worth taking sandpaper as well.
Self-production procedure
To make devices you should do the following:
- Mark the steel pipe and cut it to length.
- Fix the tube and make longitudinal cuts with a grinder.
- Trim the end of the gutter. You need to make an angle of 35 degrees.
- Remove burrs with a file.
- Sharpen the working part from the inside. Go along the bottom with a semicircular file.
- Make a hole for a screw to secure the handle.
- Place the handle into the device.
- Tighten the screw.
Step-by-step manufacturing technology of weed extractor
You can make the tool using a corner. It should be cut to 30-40 centimeters. It is also worth taking a pipe to fix the cutting.
To make a tip, you should step back 15 centimeters from the extreme part and make a mark. Make a cut to get a point. Attach a pipe to which the cutting will be attached.
It is also worth welding another piece of pipe to the product. This will help form the support. It is recommended to then place your foot on it. After this, it is worth adjusting the cutting. All metal fragments should be welded. Finally, place the handle and screw in the screw.
There are many options for weed control tools. To achieve good results in the fight against unwanted plants, it is worth choosing the right equipment.
